HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案 HYSOL GR360A-F8電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL GR 360A-F8 epoxy molding compounddelivers outstanding performance and ease of use.
Thismaterial is designed to achieve JEDEC Level 3 requirements,at 260°C reflow temperature.
樂泰 HYSOL GR 360A-F8 meets UL 94 V-0 Flammabilityat 3.175mm thickness.
TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 35
Spiral Flow, @ 177°C, cm 64Shelf Life:@ 5oC, months 6TYPICAL PROCESS DATAHandling
Preheat Temperature :Conventional mold, °C 80 to 100Automold, seconds 0 to 5Molding Temperature, °C 175 to 195Molding Pressure, Kg/cm2 40 to 100Transfer Time:Conventional mold, seconds 10 to 20Automold, seconds 4 to 10Curing Time, :Conventional mold:@ 175oC, seconds 60 to 90Automold:@ 175oC, seconds 50 to 79Post Cure @ 175°C, hours 4 to 6
StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers. After removal from coldstorage, the material MUST be allowed to come to roomtmperature, in the sealed container, to avoid moisture contamination.
The suggested waiting time for a standard 15kg carton box is 24 hours.
樂泰 HYSOL GR 360A-F8環(huán)氧樹脂成型復合材料具有出色的性能和易用性。
該材料設計達到了在260°C回流溫度下的JEDEC 3級要求.
|
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發(fā)布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。